Model TLR5000AX2
Features For Tubeline Automatic Continuous Bale Wrappers
- Film Snap,
- Fully Automatic Cycling,
- Electric Start HP Honda Gas Engine with Spark Arrester & Low Oil Alert,
- Road Light C/W Reflector,
- Temperature Guage On Hydraulic Tank,
- Hydraulic Steering,
- Electric Hydraulic Switch In Control Panel Wired For Feild Installed Options,
- Hydraulic Overcenter Brake To Pack Bales Tightly,
- Adjustable Stroke Length On Charge Table,
- 2 30″ Pre-tensioners,
- Cross Tube Unloading To Push Last Bale Off Table,
- Hydraulic Lift Ramp Except on 5000,
- Adjustable Tounge,
- Safety Shut-off Switch On Guards,
- Automatically Idles Down When Cycle Completed
Model TL1000R
Features For Tubeline Individual Round Bale Wrapper
- Capable Of Wrapping Up To 5′ X 5′ 6″ Round Bale,
- Uses Auxillary Hydraylics To Spin The Table And Wrap The Bale,
- Wrap Counter Sets The Desired Number Of Rotations Of Wrap Per Bale & Displays The Current Rotation,
- Adjustable Bale Guides Allows 4′ Or 5′ Bales To Be Centered On The Turntable,
- Manual Transport Lock Secures The Bale Platform To Prevent Dumping During Transport,
- 3 Point Hitch Easily Unloads Wrapped Bales,
- After A Bale Has Been Unloaded And A New One Placed On The Turntable The Knife Easily Cuts The Plastic Wrap For Continuous Operation.
Tubeline Automatic Continuous Bale Wrappers
| Model | Length | Width | Height | Weight (lb) | 3Pt Hitch | Drive | Bale Size | Bale Guides | Film Width | HP Req |
| TLR5000AX2 | 18′ | 9′ | 9′ | 5100 | (2) 11Lx15 (2) 27×10.5 | 8 Ply Traction Impl | 5′ 6″ | Not Applicable | (2) 30″x55% | 13 HP |
| TL5500AX2 | 25′ 5″ | 9′ | 9′ | 5800 | (4) 11Lx15 | 8 Ply | 5′ 6″ | Up to 3’x3’x5′ 6″/ Up to 4’x4’x5′ | (2) 30″x55% | 13 HP |
| TL6500AX2 | 25′ 5″ | 10′ 8″ | 10′ 7″ | 7950 | (4) 12.5Lx15 | 10 Ply | 7′ | 3’x3’x5’6″x 2 high | (2) 30″x55% | 20 HP |
Tubeline Individual Round Bale Wrapper
| Model | Length | Width | Height | Weight (lbs) | 3 Pt Hitch | Drive Type | Bale Size | Bale Guides | Film Width | HP Required |
| TL1000R | 104″ | 80″ | 84″ | 1,600 | Category II | Hydraulic | 4×4 to 5×5.5 | Adjustable 4′ or 5′ | 30″ | 30 HP |