Model 911B
- EZ Self-Loading Arm
- Bale damage eliminated w/ Hyd. Bale Damper System
- Side Tip Damper Gently tips bale on to end
- Hydraulic Cut and Tie
- Quick Fit 30″ Film Dispensers w/ 3 holders
- 4 Lever cable controls wrapping w/auto stop
- Advanced Bale Wrap Computer w/new features
- Full Road Lighting Kit
- Protected by shear bolt unit on table index
- Oversize wheel option for wet ground conditions
- Optional Joystick control (no cables) with auto stop and cut on Model 991BJS
- Opt. Cab Mount Electronic Controls Fully Automates Wrapping Operations w/ manual cable overide on Model 991BE
- Optional Infra-Red Remote on Model 991BER
Model 911L
- 3- Point Hitch Non -Self Loading Model 991L Above
- Trailed Version is Model 991LT with 20.5 X 8 – 10 Wheels
- Quick Fit 30″ Film 750/500 Dispenser w/ 2 holders
- Protected by shear bolt unit on table index
- Bale support end bobbins
- No Cut & Tie – Manual Cut
- Quick Hitch System
- Optional Cut & Tie on Models 991LBT & LBERT
- Opt. Electronic Remote Control on Models 991LBT & LBERT
- Hydraulic Unit Shown Above Not Included
- Economy Wrapper with solid construction & dependable performance
- Load & Unload w/ Tractor Mounted Bale Grabber
- Working Speed of 30 Rotations Per Minute
Model 995LT
- Trailed Version is Model 995LT (Non -Self Loading) w/ 20.5 X 8 – 10 wheels
- 3- Point Hitch Non -Self Loading is Model 995L
- Quick Fit 30″ Film 750/500 Dispenser w/ 2 holders
- Wraps Big Square Bales in Sizes: 28 X 32 X 72 32 X 32 X 72 32 X 36 X 72
- Also wraps Round Bales up to 5′ X 5′
- Model 95LST & 995LS includes cut & tie monitor
- Model 95TSR & 995LSR includes cut & tie monitor, automatic with remote contol, manual over-ride at cab and valve, & auto film break sensors
- Wraps both Round & Square Bales Efficiently
- Common sense design, quality components, and precision engineering
Model 995LM
- Mini-wrapper for Small Convenional Square Bales
- Non-self Loading
- 3 Point MTD
- Auto Stop
- Bale Wrap Monitor
- Bale Support Bobbins
- Aluminum Film Dispenser For 20″ Film
- Uses 250 mm, 360 mm, or 500 mm Film
- Patented oscillating rollers provides accurate wrapping
- Safety Bar keeps operator clear of rotating table
- Hydraulically driven with control through single bank valve
- Attach machine to tractor or hydraulic power pack
- Manually load and unload bales
- Category 2 lower linkage
- Also can wrap small round bales
- Minimum bale weight of 66 pounds
| Model | Trans Width | Trans Length | Total Height | Weight in lbs | Table Speed | Greasing Points | Hyd Req | Electrical Req | Tractor Attach | Protect Mech | Wheel Size |
| 991 B | 7′ 9″ | 18′ 0″ | 8′ 1″ | 4123 | 30 RPM* | 19 | 5 gpm @ 2200 psi | 12V/ 7 PIN | Drop pin | Shear Bolt /Roll Pin | 300x65x12 |
| 991 L | 5′ 5″ | 9′ 2″ | 6′ 4″ | 1764 | 30 RPM* | 11 | 5 gpm @ 2200 psi | 12V/ 7 PIN | Quick Hitch | Shear Bolt /Roll Pin | N/A |
| 995 L | 5′ 8″ | 10′ 2″ | 6′ 6″ | 2426 | 30 RPM* | 15 | 5 gpm @ 2200 psi | N/A | Drop Pin | Shear Bolt /Roll Pin | N/A |
| 995 LM | 4′ 6″ | 7′ 3″ | 4′ 6″ | 761 | 25 RPM* | ? | 1.5 gpm@ 870 psi | 12V/DC | Cat 2 Low link | N/A | N/A |